Download Print this page

Advertisement

Quick Links

LE-03
Electric energy meter,
3-phase
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
The LE-03 is a static (electronic) calibrated electricity meter of
three-phase alternating current in a direct system.
Functioning
A special electronic system under the influence of flowing cu-
rrent and applied voltage in each phase generates pulses pro-
portional to the energy drawn in the respective phase. Energy
consumption in the phase is indicated by a flashing of corre-
sponding LED (L1, L2, L3). The sum of the three phase pulses is
indicated by a flashing LED and converted into energy absorbed
throughout the three-phase system. Its value is displayed by the
mechanical drum abacus.
The last, red number on the drum abacus indicates row 1/10
kWh (100 Wh).
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading

Summary of Contents for F&F LE-03

  • Page 1 Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose The LE-03 is a static (electronic) calibrated electricity meter of three-phase alternating current in a direct system. Functioning...
  • Page 2: Measured Value

    Measured value Active energy consumed [kWh] Pulse output The indicator has a pulse output. This allows you to connect a pulse meter-reading pulses generated by the counter. For proper operation of the indicator is not required to connect additional devices. Meter number The meter is marked with individual serial number allowing its unambiguous identification.
  • Page 3 Sealing The meter has sealable input and output terminal covers to pre- vent any attempts to bypass the meter. - 3 -...
  • Page 4: Front Description

    Front description Mounting 1. Disconnect the power supply. 2. The indicator mounted on a rail in the distribution box. 3. Using a screwdriver, remove the screws and remove the front shield meter terminals. 4. Connect power to terminals 1 (L1), 3 (L2), 5 (L3). 5.
  • Page 5 Wiring diagram 1 power input L1 6 power output L3 2 power output L1 7 N-wire neutral 3 power input L2 8 pulse output (–) 4 power output L2 9 pulse output (+) 5 power input L3 - 5 -...
  • Page 6 Technical data installation 4-wire rated voltage 3×230/400 V minimum measured current 0.04 A base current 10 A maximum current 100 A voltage measuring range 160÷265 V measurement accuracy (IEC62052) 1st class rated frequency 50 Hz insulation protection class housing PC+ABS material own power consumption <10 VA;...
  • Page 7: Warranty

    Dimensions Warranty F&F products are covered by a 24-month warranty from the date of purchase. The warranty is only valid with proof of purchase. Contact your dealer or contact us directly. CE declaration F&F Filipowski sp. j. declares that the device is in conformity with the essential requirements of The Low Voltage Directive (LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC) Directive 2014/30/UE.
  • Page 8 General work safety conditions » Please read the instructions carefully before installation. » The device should be installed and operated by qualified per- sonnel who are familiar with its design, operation, and asso- ciated risks. » Do not install a meter that is damaged or incomplete. »...