Replacement; Troubleshooting; Checkpoints - Samsung NV75T8579 Series User & Installation Manual

Hide thumbs Also See for NV75T8579 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

Replacement

Bulbs
WARNING
Before replacing a bulb, turn off the oven and unplug the power cord.
Use only 25-40 W / 220-240 V, 300 °C heat-resistant bulbs. You can purchase
approved bulbs at a local Samsung service center.
Always use a dry cloth when handling a halogen bulb. This is to prevent the
bulb from being tampered with fingerprints or sweat, resulting in a shortened
lifecycle.
Side oven light
NV75T8579RK_EE_DG68-01278A-01_SV+NO+FI+DA+EN.indb 49
NV75T8579RK_EE_DG68-01278A-01_SV+NO+FI+DA+EN.indb 49
1.
Remove the glass cap by turning anti-
clockwise.
2.
Replace the oven light.
3.
Clean the glass cap.
4.
When done, follow step 1 in the reverse
order to reinsert the glass cap.
1. Hold the lower end of the cover of the
side oven light with one hand, and use
a flat-sharp tool such as a table knife to
remove the cover as shown.
2. Replace the side oven light.
3. Reinsert the light cover.

Troubleshooting

Checkpoints

If you encounter a problem with the oven, first check the table below and try the
suggestions. If the problem continues, contact a local Samsung service centre.
Problem
Cause
The buttons cannot
If there is foreign
be pressed properly.
matter caught
between the buttons
Touch model: if there
is moisture on the
exterior
If the Lock function
is set
The time is not
If there is no power
displayed.
supplied
The oven does not
If there is no power
work.
supplied
The oven stops while
If it is unplugged from
in operation.
the power socket
If continuous cooking
The power turns off
during operation.
takes a long time
If the cooling fan does
not work
If the oven is installed
in a place without
good ventilation
When using several
power plugs in the
same socket
Action
Remove the foreign
matter and try again.
Remove the moisture
and try again.
Check whether the
Lock function is set.
Check whether there is
power supplied.
Check whether there is
power supplied.
Check if the Demo
mode is on.
Reconnect the power.
After cooking for a
long time, let the oven
cool.
Listen for the sound of
the cooling fan.
Keep the gaps
specified in the
product installation
guide.
Use a single plug.
English 49
2021-05-28 오전 10:36:56
2021-05-28 오전 10:36:56

Advertisement

Chapters

Table of Contents
loading

Table of Contents