Table of Contents
Advertisement
3.1.4.10 Init Display First
This field is used to select whether to initialize the AGP or PCI
first when the system boots.
AGP
PCI Slot
3.1.4.11 USB0 Access Interface, USB1 Access Interface and USB2 Ac-
cess Interface
These fields are used to select the access interface of the USB
devices. The options are EBD Bus and PCI Bus.
3.1.4.12 USB2.0 Access Interface
This field is used to select the access interface of the USB 2.0
device. The options are EBD Bus and PCI Bus.
3.1.4.13 MAC Access Interface and Audio Access Interface
These fields are used to select the access interface of the MAC
and audio device. The options are EBD Bus and PCI Bus.
When the system boots, it will first initialize the
AGP.
When the system boots, it will first initialize PCI.
BIOS Setup
3
71
Advertisement
Table of Contents
