DFI 661FX-MLV User Manual page 54

3
BIOS Setup
Many disk diagnostic programs which attempt to access the boot
sector table will cause the warning message to appear. If you are
running such a program, we recommend that you first disable this
field. Also, disable this field if you are installing or running certain
operating systems like Windows
system may not install nor work.
3.1.2.3 CPU L1 & L2 Cache
These fields speed up the memory access. The default value is
enabled. Enable the external cache for better performance.
3.1.2.4 Hyper-Threading Technology (for Intel
with Hyper-Threading Technology only)
This field is used to enable the functionality of the Intel
Pentium
appear only when using this processor.
3.1.2.5 CPU L2 Cache ECC Checking
The processors supported by the system board come with built-
in Level 2 cache. By default, ECC is enabled to check the Level 2
cache. If you are not using this function, set this field to Disabled.
3.1.2.6 Quick Power On Self Test
This field speeds up Power On Self Test (POST) whenever the
system is powered on. The BIOS will shorten or skip some check
items during POST. To attain the shor test POST time, select
"Fast".
3.1.2.7 RAID or SCSI Card Boot
If there are drives connected to both the SATA connector and
PCI SCSI add-in card, you can select the drive you want to boot.
SiS 964 RAID
PCI SCSI Card
54
®
4 Processor with Hyper-Threading Technology and will
The drive is connected to the SATA connec-
tor that is on the system board.
The drive is connected to the PCI SCSI add-
in card that is installed in a PCI slot.
98/2000/ME/XP or the operating
®
®
Pentium
®
4 Processor
®