Table of Contents
Advertisement
3
BIOS Setup
3.1.3.2 AGP & P2P Bridge Control
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
AGP Aperture Size
This field is relevant to the memory-mapped graphics data of the
AGP card installed in your system. Leave this in its default setting.
Graphic Window WR Combin
This field is used to enable the register that defines the starting
address of the graphic windows for Graphic Unit Interface (GUI).
AGP Fast Write Support
When the AGP Fast Write function is enabled, it will improve the
system's performance.
AGP Data Rate
This field is used to select the AGP mode of the AGP card installed
on the system board.
62
Advertisement
Table of Contents
