Table of Contents
Advertisement
2.6.8 Front Panel Connectors
HD-LED: Primary/Secondary IDE LED
This LED will light when the hard drive is being accessed.
RESET: Reset Switch
This switch allows you to reboot without having to power off
the system thus prolonging the life of the power supply or sys-
tem.
SPEAKER: Speaker Connector
This connects to the speaker installed in the system chassis.
ATX-SW: ATX Power Switch
Depending on the setting in the BIOS setup, this switch is a "dual
function power button" that will allow your system to enter the
Soft-Off or Suspend mode. Refer to "Soft-Off By PWRBTN" in
the Power Management Setup (Chapter 3).
Hardware Installation
2019
ATX-SW
J13
PWR-LED
2 1
2
SPEAKER
RESET
HD-LED
45
Advertisement
Table of Contents
