2
Hardware Installation
2.5.6 RJ45 LAN Port
RJ45 LAN
The system board is equipped with an onboard RJ45 LAN port
at location CN6 of the system board. It allows the system board
to connect to a local area network by means of a network hub.
BIOS Setting
Enable or disable the onboard LAN in the Integrated Peripherals
submenu ("SIS OnChip PCI Device" section) of the BIOS. Refer
to chapter 3 for more information.
To wake up the system via the LAN port, set the "Resume On
LAN" field ("PM Wake Up Events" section) in the Power Man-
agement Setup submenu of the BIOS to Enabled.
Driver Installation
Install the "SiS LAN Drivers". Refer to chapter 4 for more infor-
mation.
33