Table of Contents
Advertisement
2
Hardware Installation
2.5.4 VGA Port
VGA
The system board can only be used with an analog video moni-
tor. Connect the monitor's 15-pin D-shell cable connector to the
VGA port (Blue) at location CN2. If your monitor supports ana-
log video but does not have a 15-pin D-shell connector, see your
monitor dealer for the adapter or optional cable. After you plug
the monitor cable into the VGA port, gently tighten the cable
screws to hold the connector in place. Some monitors have a
switch that chooses between analog and TTL (or digital) opera-
tion. If your monitor has such a switch, set it for analog.
BIOS Setting
Select the VGA's share memory size in the Advanced Chipset
Features submenu ("OnChip AGP Control" section) of the BIOS.
Refer to chapter 3 for more information.
Driver Installation
Install the "SiS Graphics Drivers" contained in the provided CD
into your system. Refer to chapter 4 for more information.
30
Advertisement
Table of Contents
