Table of Contents
Advertisement
Fire Alarm Control Panel LT-32 / LT-159
9
DISPLAY AND CONTROLS
The touch screen display and LED indications, allow the user to review the system status and, with appropriate user PIN, have access and perform tasks in
accordance with the requirements of the local fire regulations. There are 8 status icons provided on the front panel and 4 push buttons for event conditions.
STATUS ICON
CONDITION / CONTROL
FIRE
SYSTEM FAULT
GENERAL FAULT
DISABLE
TEST
SOUNDER SILENCE
POWER FAULT
(from 100 ... 230 Vac or batteries)
POWER
26
COLOR
DESCRIPTION
Red (blinking)
A fire condition has been detected (buzzer active)
Red (fixed)
The user has acknowledged the event by buzzer silence
Yellow (fixed)
System fault
Yellow (blinking)
General fault, buzzer is active
Yellow (fixed)
The user has acknowledged the event by buzzer silence
Yellow (blinking)
A device or zone is disabled
Yellow (blinking)
A zone is in test mode
Yellow (blinking)
The internal buzzer is silenced
Yellow (fixed)
The sounders are silenced
Yellow (blinking)
Mains fault
Yellow (fixed)
Batteries fault
Green (fixed)
The system is switched on and the power is supplied via the mains
M-168.1-SERIE-LT-EN / 08.2022
Advertisement
Table of Contents
