Table of Contents
Advertisement
Fire Alarm Control Panel LT-32 / LT-159
13.7 Configuration – activation delay
1.
Follow the steps to enter in "Panel Configuration" menu.
2.
Click on the right of "Activation delay" option, then assigned the output delay activation from 0 (immediate activation) to 600 seconds and confirm with enter.
3.
To enable the Output to be activated with the delay set, in the Cause and Effect I/O Matrix must be set the icon
44
to the corresponded Output.
M-168.1-SERIE-LT-EN / 08.2022
Advertisement
Table of Contents
