Table of Contents
Advertisement
15 MAINTENANCE
A logbook should be used for recording day to day events in the system, it should be used to record service and maintenance work visits.
ROUTINE TESTING
In order to ensure that the system is fully operational it must be routinely tested in accordance with the requirements of EN 54-14, national code of practice and
local requirements.
BATTERIES
As a minimum, replace the panel batteries that provides power to the system every four years. The battery units must always be disposed of in accordance with the
battery manufacturer's recommendations and local regulations. Please replace the batteries for equivalent ones otherwise the standby requirement will not be meet.
FAULT MONITORING AND RECTIFICATION
Where there is an active fault in the system, which is displayed at the panel, then this fault can be interrogated by a trained person. To assist in decision making as to
the cause and solution, see section headed Messages and their meaning.
CLEANING
The panel case may be cleaned periodically by wiping with a soft, damp lint-free cloth. Do not use any solvents. Before cleaning the touch screen ensure the panel is
at access level 1 and take care to use a clean cloth to clean the touch screen.
M-168.1-SERIE-LT-EN / 08.2022
Fire Alarm Control Panel LT-32 / LT-159
55
Advertisement
Table of Contents
