Table of Contents
Advertisement
Figure 39. Removing the 4 x 2.5-inch rear drive module air shroud
Next steps
1.
Replace the 4 x 2.5-inch rear drive module air
shroud.
Installing the 4 x 2.5-inch rear drive module air shroud
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in
Before working inside your
system.
Steps
1. Align the tabs on the air shroud with the slots on the rear drive module.
2. Lower the air shroud into the rear drive module until it is firmly seated.
Installing and removing system components
83
Advertisement
Table of Contents
