Menu Maps: Me-Arc Remote Control; Figure 4-1, Favs/Ctrl/Meter Button Menu Maps - Magnum Energy ME-ARC Series Owner's Manual

Menu Maps
4.0

Menu Maps: ME-ARC Remote Control

Figures 4-1 through 4-5 are an overview of the settings and information displays available from
the ME-ARC's menu buttons. Note: When applicable, battery voltage defaults and ranges are
shown for a 12-volt battery (24-volt systems multiply by 2; 48-volt systems multiply by 4).
FAVS
F1
5 Watts
CTRL
01
Auto Connect
R
02
Multi-Stage
R
03
OFF
R
04
Press SELECT
METER
[Status/Fault]
01 DC Meters
P
R
[Status/Fault]
02 AC Meters
P
R
[Status/Fault]
03 Timers
P
R
[Status/Fault]
04 AGS Meters
R
[Status/Fault]
O5 BMK Meters
R
[Status/Fault]
O6 ACLD Meters
R
[Status/Fault]
O7 PT Meters

Figure 4-1, FAVS/CTRL/METER Button Menu Maps

Page 43
Search Watts F2
R
20.0 VDC
F5
OFF
ACIn Control
Set ACIn Control
P
Auto Connect
CHG Control Set CHG Control
P
Multi-Stage
Gen Control
Refer to AGS CTRL menu maps in Section 7.2.5
PT Control
Refer to PT CTRL menu maps in Section 10.2.3
Read Only displays
01A DC Volts
R
14.4 VDC
Note: Shading denotes screens that only display
with specific Magnum inverter/charger models.
(02B-D = MS-PAE & MSH models, 02E = both MSH
models, 02F = MSH-RE models only)
02A AC Output
R
120 VAC / 60.0Hz
02F Input AC2 02E Input AC1
R
120 Volts AC
120 Volts AC
03A Charge Time
R
12.0 Hrs
Refer to AGS METER menu maps in Section 7.2.5
Refer to BMK METER menu maps in Section 8.2.3
Refer to ACLD METER menu maps in Section 9.2.3
Refer to PT METER menu maps in Section 10.2.3
LBCO Setting F3
R
Amps = 30A
Gen Control F4
R
Flooded
VDC Connect
Time Connect
R
SOC Connect
ACIn - Disabled
Start Float
R
Start Bulk
01B DC Amps
-140 Amps
02B Load Amps
02C Input Amps
R
20 Amps AC
02D Inv/Chg Amps
R
03B Since Absorb 03C Since EQ
R
Done 003 Days Start
© 2021 Magnum Energy, Inc.
AC Input
R
Battery Type
30 Amps AC
R
10 Amps AC
140 Days