Table of Contents
Advertisement
OSD Menu
System Settings
This menu is used to configure system settings related to the video display.
Sub Menu
70
Function/Channel Button
Function Button
Function Button (ALT)
Channel Button
CH1
CH2
CH3
GPI
Type
Pin1 ~ Pin7
Language
Date/Time
Sets the function or channel to assign to the F buttons or CH button.
Sets the function to assign to the F buttons of the main unit (
function from the following list (
Sets the channel to assign to the CH button on the display.
CH1 to CH20 (CH1)
Select a CH button and register a channel number. A list of settings under
the menu [Channel Settings] (
CH1 to CH20 (CH2)
CH1 to CH20 (CH3)
You can operate the video display using an external controller such as a switcher that has been
connected to the GPI terminal. Operates by connecting (shorting) the GND (No. 8 Pin) to No.s 1 to 7.
• This function will not work correctly in the following cases.
- If the same function is assigned to multiple pins.
-
If the changes to this menu item setting and the pin assignments were made when the pins were shorted
Level,
[Level]: Operates while shorted.
Short Edge
[Short Edge]: Switches between "operate"/"do not operate" for each
Assigns functions in each GPI pin. (
Functions that can be registered:
ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3, User 1 (2020 PQ), User 2 (2020 HLG),
User 3 (DCI PQ), User 4 (DCI PQ D65), User 5 ~ User 9, CINEMA EOS SYSTEM,
ACESproxy (ver. 1.0.1), CH1 to CH5, CH1-CH2*, CH2-CH3*, CH1-CH3*, Channel Up*,
Channel Down*, Marker 1 to Marker 3, Time Code, Audio Level Meter, Wave Form Monitor,
Vector Scope, Histogram, Frame Luminance Monitor, Chromaticity Diagram, False Color 1/2,
Monochrome, Blue Only, Red Off, Green Off, Blue Off, Compare View, Chroma Up*, MENU, Tally
Green, Tally Red, Power On, — (Not set)
*
only
• About [Tally]
A tally appears at the top of the screen. Combining [Tally Green] and [Tally Red] makes [Tally Amber].
• [Power On]: Can only be registered to [Pin7].
English
Sets the language of the OSD menu and messages.
日本語
简体中文
Sets the year/month/date/hour/minute.
Setting Options (Bold: factory default)
74).
36) is displayed.
short.
16)
13). Select an F button and assign a
Advertisement
Table of Contents
