Table of Contents
Advertisement
Operating the Video Display
Checking Signal Information and Status of the Main Unit
The video display is equipped with a banner display function.
1 Press the jog dial when the OSD menu is closed.
16
• The channel name, signal information, and status of the main unit will be displayed in the banner. It will
automatically disappear after 6 seconds.
Note
• You can select how the banner is displayed ([Banner]
• You can monitor the input signal status. ([Signal Monitoring]
• For more detailed signal information, please refer to the section on [Signal Information] (
• The [Detecting sync.] banner will continue to appear until the input signal is synchronized.
Operating the video display using an external device [GPI terminal]
You can operate the video display using an external device connected to the GPI terminal and execute the functions
registered in each pin. Remote operation is possible only when the video display is turned on.
Pin layout for GPI terminal
1 Connect an external control device to the GPI terminal.
2 Select
• The pin selection screen will be displayed.
3 Select a pin number and press the jog dial.
4 Select the function to assign.
• See [System Settings] (
5 Press the jog dial.
• The setting is confirmed.
Pin No.
1
2
3
4
5
6
7
8
[System Settings]
[GPI].
70) in the OSD menu for settable functions.
71).
59)
Signal
Factory default
Pin1
CH1
Pin2
CH2
Pin3
CH3
Pin4
Time Code
Pin5
Tally Green
Pin6
Tally Red
Pin7
Power On
Pin8 (GND)
—
76).
A tally appears at the
top of the screen.
Advertisement
Table of Contents
