Table of Contents
Advertisement
Hardware error
Backlight error.
Fan error.
Panel error.
I/F error.
Audio I/F error.
System error.
Input signal
No Signal
Unsupported
Operation
Invalid operation.
"Protect Settings" is on.
"CDL/User LUT Bypass" is on.
Invalid Password.
No license.
USB memory
USB memory is not connected.
Unsupported USB memory.
Firmware Update
No update file.
Failed to read update file.
The firmware/license has been already updated.
Message
Description and Action
Disconnect the power cord, reconnect it, and then
turn on the power.
If the message persists, contact Canon Customer
Center.
Displayed when there is no video signal input.
Unsupported video signal is input. Check the
supported signal format (
77).
Operation is disabled. Check the setting items.
To use the OSD menu, move the selection frame
to [Protect] and press the jog dial for approximately
3 seconds.
When [CDL/User LUT] [Bypass] is turned [On],
you cannot adjust [Power], [Saturation], [Offset], or
[Slope].
Enter the correct password.
This function cannot be used as the license file has
not been applied. Refer to the Canon website for
detailed information.
Correctly connect the USB memory to the USB port
of this main unit.
Check the USB memory format and make sure it is
not protected.
Firmware update files are not saved on USB memory
or other media.
There is an error in the file. Check the file.
This is the file that is updated on the video display.
Error Messages
95
Advertisement
Table of Contents
