Canon DP-V2730 Operation Manual page 30

OSD Menu
Sub Menu
HDMI Link
30
Automatic Adjustment
Color Gamut/Gamma/
EOTF
Luminance/HDR Range On, Off
Copy Picture Mode
Picture Mode (Copy
from)
Execute
Picture Mode Name
Anchor Adjustment
Reset
When [Picture Mode] [User 1–9]
Video is displayed at the image quality linked to the video image quality setting using the HDMI
metadata.
• This cannot be set when [Channel Settings] [Input Configuration] [Multi View] is selected.
• Parameter of HDMI metadata and Video Display (
On, Off Turns the HDMI link on/off.
On, Off Matches the [Color Gamut] and [Gamma/EOTF] settings of the video
display with the HDMI metadata.
Matches the [Luminance] and [HDR Range] setting of the video display
with the HDMI metadata.
When [Picture Mode] [User 1–9]
Copy the Picture Mode settings.
• In other [Picture Mode], the results of calibration performed at the factory are copied.
ITU-R BT.709 Select "Picture Mode (Copy from)".
ITU-R BT.2020
Adobe RGB [User 1–9]: Select from other than the currently set mode.
DCI-P3
User 1 (2020 PQ)
User 2 (2020 HLG)
User 3 (DCI PQ)
User 4 (DCI PQ D65)
User 5 ~ User 9
Performs copy.
You can change the name of [User 1–9] within 24 characters including
alphabetical characters, numbers, and symbols.
OK Temporarily saves parameters for adjusting [Luminance], [Brightness],
Cancel [Chroma], and [HDR Range] and recover the values (anchor point setting).
[OK]: Performs anchor point setting.
[Cancel]: Returns to the previous screen without setting anchor point.
OK Return [Picture Mode] to factory default. Note that in [User 1–9] mode
Cancel where you are performing calibration, the setting returns to the value after
calibration instead of the factory default.
When selected, the message [Reset Adjustment settings to defaults?]
appears.
[OK]: Performs reset.
[Cancel]: Returns to the previous screen without resetting.
Setting Options (Bold: factory default)
32)