Table of Contents
Advertisement
OSD Menu
Adjustment
This menu is used to adjust the image quality. The factory defaults differ according to the [Picture Mode] setting. (
Sub Menu
Picture Mode
Luminance
Brightness
Chroma
ITU-R BT.709
Select a preset mode.
ITU-R BT.2020
Adobe RGB
[ITU-R BT.709], [ITU-R BT.2020], [Adobe RGB], [DCI-P3]: Mode set to the
DCI-P3
User 1 (2020 PQ)
User 2 (2020 HLG)
[User 1–9] (User 1 (2020 PQ), User 2 (2020 HLG), User 3 (DCI PQ),
User 3 (DCI PQ)
User 4 (DCI PQ D65), User 5 ~ User 9): This mode allows you to set each
User 4 (DCI PQ D65)
User 5 ~ User 9
CINEMA EOS SYSTEM
ACESproxy (ver. 1.0.1)
[CINEMA EOS SYSTEM]: Canon Log is the ideal mode for displaying
[ACESproxy (ver. 1.0.1)]: A mode to display ACESproxy videos in optimum
• [Aces proxy (ver. 1.0.1)] cannot be set when [Channel Settings] [Picture Mode]
0 to 1000.0
Adjusts the peak brightness (Increments of 0.1).
• The luminance values are just a guide and not guaranteed absolute values.
-500 to 500 (0)
Adjusts the black level of the image. (Increments of 1)
0 to 2000 (1000)
Adjusts the color saturation of the image (color depth). (Increments of 1)
• [Chroma] is not settable in the following cases:
-
-
-
-
-
-
-
-
Setting Options (Bold: factory default)
brightness, color temperature, gamma/EOTF, and color gamut of the
three primary colors chromaticity points of each standard.
item in [Adjustment] individually. You can change the mode name
within 24 one-byte characters including alphabetical characters,
numbers, and symbols (
images captured with Cinema EOS cameras. Using Camera Link, you
can have the image quality setting change automatically ([Automatic
Adjustment (CINEMA EOS)]
gamma/EOTF and color gamut.
[Type] is set to an option other than [Normal].
When [CDL/User LUT] is set to an option other than [Off]
When [Color Gamut] is set to [Cinema Gamut to XXX] or [S-GamutXXX]
When [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or [Canon Log 3]
When [2020 Constant Luminance] is set to [Constant]
When the [Format] signal method is set to ICtCp or XYZ
When [Channel Settings] [Input Configuration] is set to [Multi View]
When [Picture Function Settings] [Compare View] [Enable] is set to [On]
When [Chroma Up] is set to [On]
30).
60).
21
33)
Advertisement
Table of Contents
