Marker Settings - Canon DP-V2730 Operation Manual

Marker Settings

This menu is used to configure various markers. The factory defaults differ according to the [Marker Preset] setting
( 50).
Sub Menu
Marker Preset
1
Aspect Marker
Enable
Mask
Aspect Ratio
Line
Line Width
Marker 1 to 5 Customizes markers which are assigned to markers 1 to 5.
Off
[Aspect Marker] displays a range in accordance with the specified aspect ratio.
On, Off Switches the aspect marker On, Off.
Black Switches the mask color. Mask is the blanking area outside the range of
Half the marker.
Off
[Black]:
[Half] (50% gray):
[Off]: Turns mask off.
16:9, 15:9, 14:9, 13:9, Sets the aspect ratio of the aspect marker.
4:3, 2.39:1, 2.35:1, The aspect ratio can be entered as a numeric value when you select
1.896:1, 1.85:1, 1.66:1, [Variable] (0.01:1 increments). The grayed out slider becomes active and
Variable can be used to set the aspect ratio.
• When Variable is
selected
1.00:1 to 3.00:1
On, Off When [Mask] [Black] or [Half]
Switches lines on mask On, Off.
Thick Sets the thickness of the aspect marker line.
Normal
Thin
Setting Options (Factory default)
OSD Menu
45