Table of Contents
Advertisement
Sub Menu
Enable
Display
Luminance Graph
Settings
Luminance
Distribution
Reference
Luminance Level -
Peak
Reference
Luminance Level -
Ave.
Reference Lum.
Rise Level - Peak
Reference Lum.
Rise Level - Ave.
HDR/SDR Ratio Graph
Settings
Type
Scale
Size
Reset
Export
Chromaticity Diagram
On, Off
Sets [Frame Luminance Monitor] on or off. Obtains the luminance value
when valid.
All
Sets whether each graph is displayed.
Luminance Graph
HDR/SDR Ratio Graph
[All]: Displays [Luminance Graph (Including luminance value)] and [HDR/
Luminance Value
Off
[Luminance Graph]: Displays [Luminance Graph].
[HDR/SDR Ratio Graph]: Displays [HDR/SDR Ratio Graph (Including
[Luminance Value]: Displays the peak and average luminance values.
[Off]: Does not display any graphs.
Sets [Luminance Graph] display method.
On, Off
Switches between displaying and not displaying the luminance distribution
graph.
Automatic
[Automatic]: Works in conjunction with the [HDR Range] settings to
Manual
[Manual]: Sets the upper limit for peak luminance. Areas that exceed the
• When Manual is
selected
400 to 10000 (1000)
100 to 1000 (400)
Areas that exceed the set value will be tinted. (Increments of 100)
0 to 1000 (400)
Sets the peak luminance rise reference value. (Increments of 10 cd/m
0 to 1000 (200)
Sets the average luminance rise reference value. (Increments of 10 cd/m
Sets [HDR/SDR Ratio Graph] display method. The ratios for HDR and SDR use the [False Color]
[HDR/SDR Border] settings as well as the settings for each range.
HDR/SDR
[HDR/SDR]: Displays the ratio between the HDR and SDR areas.
HDR
[HDR]: Displays the ratio of luminance in the HDR area.
Automatic, 1 00%, 75%,
When [Type] is set to [HDR], sets the scale of the luminance value.
50%, 25%, 10%, 5%
Large, Small
Sets the size of the display.
• When [Single Input Dual View] or [Multi Information View] is selected, this setting
is invalid.
Resets the displayed content.
The luminance information obtained when [Frame Luminance Monitor] is valid, is exported to the
USB memory.
On, Off
Switches the chromaticity diagram On, Off.
The performance of the chromaticity diagram may be degraded while the
vector scope is displayed.
[On]: Displays the chromaticity diagram. The chromaticity diagram is
ž [Color Gamut]: ITU-R BT.2020, ITU-R BT.709
ž [ Gamma/EOTF]: 1.0, 2.2, 2.35, 2.4, 2.6, SMPTE ST 2084 (PQ),
Setting Options (Bold: factory default)
SDR Ratio Graph].
luminance value)].
automatically tint the areas that exceed the peak luminance.
set value will be tinted.
(400 to 4000: increments of 100, 4000 to 10000: increments of 1000)
displayed only when [Color Gamut] and [Gamma/EOTF] are set as
shown below.
Hybrid Log-Gamma
OSD Menu
57
2
)
2
)
Advertisement
Table of Contents
