Table of Contents
Advertisement
OPM223/253
3.4
3.4.1
There are several ways of securing the field housing:
• Wall mounting with fixing screws
• Post mounting to cylindrical pipes
• Post mounting to square securing mast
!
Note!
When mounting in the open air with unprotected exposure to weather conditions, a weather
protection cover (see Accessories) is required.
Transmitter wall mounting
Fig. 5:
For wall mounting the transmitter, proceed as follows:
1.
Drill the bores as shown in Fig. 5 .
2.
Drive the two fixing screws through the securing bores (1) from the front.
3.
Mount the transmitter on the wall as shown.
4.
Cover the bores with plastic caps (2).
Installation instructions
Field instrument
1
154 / 6.06
mm / inch
Field instrument wall mounting
2
Installation
C07-OxM253-11-06-00-en-002.eps
11
Advertisement
Table of Contents
