Printer Ready - Pitney Bowes SendKit PB-SP100 Installation Instruction

Signing into SendPro®
Sign into SendPro® using the link in the welcome email.
spo.pitneybowes.com
Connecting the Printer Power Cord
1. Ensure you have the correct power cord for your region.
2. Connect the power cord and adapter to your printer (as shown) and
switch on.

Printer Ready

Wait for about 10 seconds until the 2 green lights remain constant and the
printer is ready.
Pitney Bowes Installation Instruction November, 2020
Aligning the Label Roll
1. Press the feed/cancel
correctly.
Note- If the label does not feed correctly please refer to label alignment
instructions inside the printer top cover.
2. Tear off the correctly dispensed label.
button and check that the label feeds out
Page 4 of 17