TROUBLESHOOTING
POWER DOWN
DO NOT remove all power without following the steps below. In the event of needing
to move the panel from one location to another it is safe to unplug the power supply
while leaving the battery plugged in.
1. Press and hold the power button for 2 seconds until a popup message appears on
the screen.
2. Select "Power Down".
3. A popup message will appear to confirm that remote will shut down. Select "OK".
4. Wait for 30 seconds until the IQ Remote PowerG shuts down fully.
5. Disconnect the power.
?
QUESTIONS?
Contact us at
techsupport@qolsys.com
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
29
OF
42
IMPORTANT: Failure to
perform these steps in
the proper sequence may
result in data corruption
and/or panel failure.
Need help?
Do you have a question about the Qolsys IQ Remote PowerG and is the answer not in the manual?