Confirmation Of The Settings - Omron CK5M-CPU1 1 Series Application Manual

7
Type the
Gate3[1].Chan[2].Dac[0]=-206241792
0 command in the Power PMAC IDE
Terminal.
8
Type the $$$ command in the Power
PMAC IDE Terminal.
3-6-4

Confirmation of the Settings

Confirm that the settings of the Galvo Scanner are correct.
1
Type the #3 j=65536 command in the
Power PMAC IDE Terminal.
2
Confirm that Gate3[0].Chan[0].Serial-
EncDataA=65536 or so is displayed.
Application Guide Laser Application (O052)
3 Connection Procedures
3
3-49