Tcrconfigurations.pmh - Omron CK5M-CPU1 1 Series Application Manual

4-7

TCRConfigurations.pmh

This file contains the condition settings for turning ON/OFF the laser.
No.
*1 Gate3[1].Chan[1].CompB
*2 Gate3[1].Chan[1].CompB
*3 Gate3[1].Chan[2].CompB
The figure bellow illustrates the condition used in this manual, where laser light is output at home, trav-
els around the square, and returns to the home again.
-50.0
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
8
−
Application Guide Laser Application (O052)
Parameter
Set the travel distance before the laser turns from OFF to ON.
Set the travel distance before the laser turns from ON to OFF.
After this, add the condition to toggle the laser output.
Set this according to the figures below.
Y axis
50.0
-50.0
0 0 0
Settings of Gate3[1].Chan[2].CompB
4 How to Customize Various Settings
Description
X axis
50.0
0 0 0
−
4
0
4-11