Data transfer
8.2.1.3 Retrieving data with enSuite
If the connected device is a PC with enSuite installed, you can now check the data transfer as
described here.
• Start the enSuite program on the PC connected to the terminals (e.g.:
Programs > Elster >
• Click on the
"Search
• Click on the "LIS200" tab in the
"Search device and
window, which then opens.
• Select
"Access"
-
"User"
-
"Use default settings"
-
- "Connection"
"Baud
-
rate":
• Click on "OK".
• Wait a few seconds until "Connected"
is displayed at the bottom of the
"Output" window.
• Once the communication link has been established, you can view certain parameters to
check it. To do this, click on "Navigation" on the left-hand side of the enSuite window
and then on
"Parameterize
the plus sign next to "Parameters" and then its sub- items.
• Click on the "Disconnect" or
enSuite).
device..." icon (magnifying glass icon).
connect"
"LIS200"
"Administrator"
"Serial
RS232"
"9600"
online" at the bottom of the navigation window, then click on
"Disconnect from all
Start > All
devices" icon in enSuite to end the test retrieval.
75