Table of Contents
Advertisement
70
Fig. 34: External antenna connected to modem assembly
i
Carefully press the antenna plug into the antenna socket until it clicks into place. In
particular, make sure that the antenna plug does not lie skew in the bushing and that it is
not stretched any longer by rotary and pull-off forces respectively.
–
Re-connect the modem and the basic device battery.
–
For EK205-M powered with external supply for basic device, switch-on the external power supply after
re-connecting the modem battery supply.
Caution!
Damage to property caused by improper device closure!
If the device is not properly closed, cables can get pinched and cause damage.
Therefore:
Ensure correct positioning of the cable guides when closing.
–
Close the housing cover and retighten the screws.
Data transfer
Advertisement
Table of Contents
