Storage - Honeywell EK205-M Operating Instructions Manual

Volume conversion device
Table of Contents

Advertisement

14

1.10 Storage

CAUTION!
Reduced performance after exceeding or falling below the valid temperature
range of the batteries.
Exceeding or falling below the valid temperature range can reduce the
performance of the batteries when storing the device.
Therefore:
– For longer-term storage, ensure that the valid temperature range of the built-
in batteries between -40 °C and +60 °C is not exceeded or fallen below.
CAUTION!
Material damage from formation of condensation!
Storing the device can lead to the formation of condensation resulting from
variations in temperature. This may result in the device malfunctioning at a later
time.
Therefore:
– After the device has been stored or transported in cold weather or if it has
been subject to extreme variations in temperature, bring it slowly to room
temperature before it is commissioned.
– The device must undergo a waiting period of at least 12 hours before it is put
into operation if condensation formed during storage.
If the power supply of the device is interrupted during storage from clamping the
batteries, the time and date need to be reset.
The following regulations apply for storage:
Relative humidity may not exceed 93%.
Do not store the packaging units outdoors.
The storage temperature may not fall below -40°C and exceed +60°C.
Avoid mechanical vibrations during storage.
General

Advertisement

Table of Contents
loading

Table of Contents