Temperature Sensor; Digital Inputs; Pulse And Reporting Inputs Nf - Honeywell EK205-M Operating Instructions Manual

Volume conversion device
Table of Contents

Advertisement

26
The pressure sensor is available as an internally completed variant.
You can find details at www.elster-instromet.com or see section 5.5 Cable glands.
Not applicable when used as a Temperature Conversion Device.
4.4

Temperature sensor

Information
Measuring range
Measurement uncertainty
Installation length
4.5

Digital inputs

4.5.1 Pulse and reporting inputs NF

The maximum meter frequency of the digital inputs can be set with the enSuite software. The
thresholds stated here for frequency and duration apply only if the so-called software debouncing
is deactivated.
Ex works, the software debouncing is activated to suppress fault pulses and so that safe counting
is limited to 2 Hz.
If the software debouncing is set to a higher frequency than 2 Hz, miscounting
from electromagnetic faults may arise under certain circumstances.
Information
No-load voltage U
0
Internal resistance R
Short-circuit current I
Switchpoint "on":
Switchpoint "off":
Pulse duration t
e
Break duration t
a
Meter frequency f
Cable length
i
k
▪ Resistance R
▪ Voltage U
e
▪ Resistance R
▪ Voltage U
a
Value
-30 – +60
max. ± 0.1
50
Value
About
About
max.
e
max.
min.
a
min.
min.
min.
max.
max.
Technical data
Unit
°C
%
mm
Unit
2.0
V
500
μA
4
300
0.8
V
5
1.8
V
62.5
ms
62.5
ms
10
Hz
10
m

Advertisement

Table of Contents
loading

Table of Contents