Master/Slave Configuration - ADJ PIXEL KLING 10C User Instructions

Pixel Kling 10C
2. Press the SET UP button until "IR: XX" is displayed. "XX" repre-
sents either "ON" or "OFF".
3. Press the UP or DOWN buttons to either activate the remote func-
tion (On) or deactivate it (Off).
Pixel Kling 10C
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave
configuration. In a Master-Slave configuration one unit will act as the
controlling unit and the others will react and copy the controlling units
operation. Any unit can act as a Master or as a Slave however, only one
unit can be programmed to act as the "Master."
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR data cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR con-
nector is the ouput. The first unit in the chain (master) will use the
female XLR connector only. The last unit in the chain will use the
male XLR connector only.
2. Connect the first "Slave" unit to the "Master." Set the "Slave" to any
DMX Channel mode.
3. Set the "Master" unit to your desired mode of operation. The "Slave"
unit will now follow the "Master".
Pixel Kling 10C
1. Set the Pixel Kling 10C to KLINGNET MODE. See page 9 NET
CONTROL MODE and follow the instructions.
2. Install one of the recommended operating softwares onto your
computer. Recommended softwares; Arkaos Media Master
Express, Media Master Pro, or LED Master (Sold Separately).
2. Connect the panels via CAT 5 Straight Network cable. When
creating your own custom cable, use RJ45 Straight Network
cable. See page 14 for connection information.
3. Map the fixtures using KlingNetMapper or Art-Net Mapper.
4. Control the fixtures using ArKaos or Art-Net software. Please refer
to the media playback software user manual for further instruc-
tions.
Note: ArKaos Kling-Net requires a gigabit (1000 mbps) Ethernet card
and network router for a smoother operation.
ADJ Products, LLC - www.adj.com - Pixel Kling 10C User Manual Page 11
Operating Instructions
Master-Slave Set Up
Kling-Net or Art-Net Operation
Pixel Kling 10C 7 Channel - DMX Values & Functions
Channel Value
1
0 - 255
2
0 - 27
28 - 255
0 - 255 PROGRAM SPEED SLOW - FAST
0 - 31
32 - 255 SOUND SENSITIVE LEAST - MOST
3 DIMMING/STATIC COLOR SELECT/
0 - 41
42 - 83
84 - 125
126 - 167
168 - 209
210 - 255
4
0 - 31
32 - 63
64 - 95
96 - 127
128 - 159
160 - 191
192 - 223
224 - 255
0 - 10
11 - 20
21 - 31
32 - 42
ADJ Products, LLC - www.adj.com - Pixel Kling 10C User Manual Page 16
Function
MASTER DIMMER
0% - 100%
STROBING/PROGRAM SPEED/
SOUND SENSITIVITY
STROBING OFF
STROBING SLOW - FAST
SOUND SENSITIVITY OFF
COLOR CHANGE SELECT/
COLOR FADE SELECT
DIMMER MODE
COLOR MACRO MODE
COLOR CHANGE MODE
COLOR FADE MODE
AUTO RUN MODE
SOUND ACTIVE MODE
COLOR MACROS & MODES
COLOR MACROS
BLACKOUT
RED
GREEN
BLUE
YELLOW
PURPLE
CYAN
WHITE
COLOR CHANGE MODE
COLOR CHANGE 1
COLOR CHANGE 2
COLOR CHANGE 3
COLOR CHANGE 4