Table of Contents
Advertisement
Pixel Kling 10C
To optimize the performance of this product, please read these operat-
ing instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
Pixel Kling 10C
• Mulit-Colors
• Five Operating Modes
• Electronic Dimming 0-100%
• Built in Microphone
• DMX-512 protocol
• 3-Pin DMX Connection
• Kling-Net and Art-Net Compatible (Recommended control solu-
tions; Arkaos Media Master Express, Media Master Pro, and LED
Master software's (sold separately).
• 4 DMX Modes: 5 Channel Mode, 7 Channel Mode, 32 Channel
Mode, and 480 Channel Mode.
• ADJ LED RC compatiable (Not Included)
• Power Cord Daisy Chain (See page 24)
Pixel Kling 10C
The Pixel Kling 10C carries a 1 year limited warranty. The reason this
product carries a 1 year limited warranty is because it is a controller.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
The R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. number
must also be written down on a piece of paper included in the ship-
ping carton. If the unit is under warranty, you must provide a copy of
your proof of purchase invoice. You may obtain a R.A. number by con-
tacting our customer support team on our customer support number.
All packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper.
ADJ Products, LLC - www.adj.com - Pixel Kling 10C User Manual Page 3
General Instructions
Features
Warranty Registration
Pixel Kling 10C
With this feature you can connect the controllers to one another
using the IEC input and output sockets. The quantity that can be
connected is 3 controllers maximum. After 3 controllers you will
need to use a new power outlet. They must be the same control-
lers. DO NOT mix controllers.
Pixel Kling 10C
Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, you will find that the
fuse holder is located inside the power socket. Insert a flat-head screw
driver into the power socket and gently pry out the fuse holder. Remove
the bad fuse and replace with a new one. The fuse holder also has a
holder for a spare fuse.
Pixel Kling 10C
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Pixel Kling 10C
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that Sound Active mode is activated.
ADJ Products, LLC - www.adj.com - Pixel Kling 10C User Manual Page 24
Power Cord Daisy Chain
Fuse Replacement
Cleaning
Trouble Shooting
Advertisement
Table of Contents
