Page 2
All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
Focus Spot 5Z Introduction Unpacking: Thank you for purchasing the Focus Spot 5Z by ADJ Products, LLC. Every unit has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
Page 5
Focus Spot 5Z Warranty Registration The Focus Spot 5Z carries a 2 year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre- paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package.
Page 6
C. The fixture has been exposed to rain or water. D. The fixture does not appear to operate normally or exhibits a marked change in performance. E. The fixture has fallen and/or subjected to extreme handling. ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 5...
Page 7
INDIVIDUALS SUFFERING FROM A RANGE OF EYE CONDITIONS, SUNLIGHT EXPOSURE DISORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET (UV) LIGHT EMITTED FROM THIS FIXTURE. ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 6...
Page 8
LEDs. This issue is not specific only to ADJ lighting fixtures, it is a common issue with lighting fixtures from all manufacturers. Although there is no true way to fully prevent this issue from happening, the guidelines below can prevent any potential damage from occurring if followed.
Screw one clamp via a M12 screw and nut into the Omega bracket. Insert the quick-lock fasteners of the Omega bracket into the respective holes on the bottom of the Focus Spot 5Z. Tighten the quick-lock fasteners fully clockwise. Pull the safety cable through the opening located on the base plate and over the trussing system or a safe fixation spot.
Page 10
These installaiton should be checked by a skilled person once a year. The Focus Spot 5Z is fully operational in three different mounting positions, hanging upside-down from a ceiling or trussing, sideways on trussing, or set on a flat level surface. Be sure this fixture is kept at least 12m (40ft) away from any flammable materials (decoration etc.).
Page 11
Enter Button 4. Locking Power Connector In 5. Fuse Holder 6. Locking 5-Pin XLR Connector Out 7. Locking 5-Pin XLR Connector In 8. Locking Power Connector Out ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 10...
Data Cable (DMX Cable) Requirements (For DMX Operation): The Focus Spot 5Z can be controlled REMOTE REMOTE via DMX-512 protocol. The DMX address is set on the front panel of the Focus Spot 5Z. Your unit and your INPUT OUTPUT...
Page 13
2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior.
In the case of the Focus Spot 5Z, when in 19 channel mode you should set the starting DMX address of the first unit to 1, the second unit to 20 (19 + 1), the third unit to 39 (20 + 19), and so on. (See the chart below for more details.)
Page 20
206-211 Internal Program 6 (Scenes 41-48) 212-216 Internal Program 7 (Scenes 49-56) 217-227 Fan Mode Low 228-238 Fan Mode High 239-249 Fan Mode Auto 250-255 No Function ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 19...
If the button sequence was entered correctly, the display and control panel will unlock. If the button sequence was entered incorrectly, the display will return to the DMX addess display. ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 20...
Page 22
USB Port Activation Pass Code = 050 Service Update Software: YES / NO Software Update Factory Restore: YES / NO Restore Factory Settings (Pass Code = 11) ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 21...
Page 23
Speed: 000~255 Fade: 000~255 Program 5 with Adjustments Program 6 Speed: 000~255 Fade: 000~255 Program 6 with Adjustments Program 7 Speed: 000~255 Fade: 000~255 Program 7 with Adjustments ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 22...
Page 24
(1) Current Maximum Temperature - Maximum fixture temp. that has been recorded, before reset and after reset. (2) Maximum Temperature - Overall maximum fixture temp. that has been recorded. (Not Resettable) (3) DMX Value options depend on the current DMX Channel mode setting. ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 23...
Page 25
MANUAL CONTROL - This menu is for manual testing and manual control. INTERNAL PROGRAMS - In this menu you are able to select 1 of 7 internal programs to run. Program running speed and fade speed are adjustable. ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 24...
Page 26
- ERROR LOGS - In this submenu you are able to check any unit errors as well a clear the error log. - SOFTWARE VERSION - Current software version is displayed. ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 25...
Page 28
“protruding pin” (Figure 3). The “protruding pin” secures the gobo housing to the gobo wheel. You will feel the gobo housing “lock” into place when the housing is inserted correctly. 8. Reassemble the unit. ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 27...
Page 31
3. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi- due, dust, dew). ADJ Products, LLC - www.adj.com - Focus Spot 5Z User Manual Page 30...
ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
Page 33
Focus Spot 5Z Specifications Model: Focus Spot 5Z Voltage: 100V ~ 240V/50~60Hz LEDs: 1 x 200W LED Working Position: Any safe working position Power Draw: 280W Fuse: Dimensions: 7.15” (L) x 10.97” (W) x 18” (H) 181.5 x 278.61 x 457.4mm Weight: 23lbs.
Need help?
Do you have a question about the Focus Spot 5Z and is the answer not in the manual?
Questions and answers