Table of Contents
Advertisement
Pixel Kling 10C
7 Channel - DMX Values & Functions
Channel
Value
4
43 - 52
53 - 63
64 - 74
75 - 84
85 - 95
96 - 106
107 - 117
118 - 127
128 - 138
139 - 148
149 - 159
160 - 170
171 - 180
181 - 191
192 - 202
203 - 212
213 - 223
224 - 234
235 - 244
245 - 255
0 - 10
11 - 20
21 - 31
32 - 42
43 - 52
53 - 63
64 - 74
75 - 84
85 - 95
96 - 106
107 - 117
ADJ Products, LLC - www.adj.com - Pixel Kling 10C User Manual Page 17
Function
COLOR CHANGE MODE CONT.
COLOR CHANGE 5
COLOR CHANGE 6
COLOR CHANGE 7
COLOR CHANGE 8
COLOR CHANGE 9
COLOR CHANGE 10
COLOR CHANGE 11
COLOR CHANGE 12
COLOR CHANGE 13
COLOR CHANGE 14
COLOR CHANGE 15
COLOR CHANGE 16
COLOR CHANGE 17
COLOR CHANGE 18
COLOR CHANGE 19
COLOR CHANGE 20
COLOR CHANGE 21
COLOR CHANGE 22
COLOR CHANGE 23
COLOR CHANGE 24
COLOR FADE MODE
COLOR FADE 1
COLOR FADE 2
COLOR FADE 3
COLOR FADE 4
COLOR FADE 5
COLOR FADE 6
COLOR FADE 7
COLOR FADE 8
COLOR FADE 9
COLOR FADE 10
COLOR FADE 11
Pixel Kling 10C
Use the UP or DOWN button to adjust the speed between "01"
(slowest) and "16" (fastest). Once you have set your desired run-
ning speed, press the SET UP button to return to your desired Auto
Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until "STATIC" is
displayed. If "STATIC TUBE: ALL" is displayed then all of the
tubes are being controlled. If "STATIC TUBE: 01" is displayed, you
are controlling the tube connected to port 1. If "STATIC TUBE:
02" is displayed, you are controlling the tube connected to port 2.
If "STATIC TUBE: 03" is displayed, your controlling the tube con-
nected to port 3. After deciding what tube(s) to control press the
SET UP button.
2. After pressing the SET UP button "STATIC CLR: XX" will be dis-
played. "XX" represents the current color number displayed.
3. There are 7 colors to choose from. Use the UP and DOWN but-
tons to scroll through the 7 colors. After you have found your
desired color you can activate strobing by pressing the SET UP
button to enter the strobe mode.
3. "STATIC STROB: XX" will be displayed, this is strobe mode. The
strobing can be adjusted between "00" (flash off) to "15" (fastest
flash).
System Reset:
This is a default running mode. When this mode is activated all modes
will return to their default settings.
1. Plug the fixture in and press the MODE button until "OPTION" is
displayed.
2. Press the SET UP button until "SYSRESET" is displayed.
3. Press the UP and DOWN buttons simultaneously to reset the unit.
Infrared Receiver:
This function is used to activate and deactivate the infrared receiver.
When this function is activated you can control the fixture using the
ADJ LED RC (Remote Control). Please see the next page for ADJ LED
RC controls and functions.
1. Plug the fixture in and press the MODE button until "OPTION" is
displayed.
ADJ Products, LLC - www.adj.com - Pixel Kling 10C User Manual Page 10
Operating Instructions
Advertisement
Table of Contents
