Table of Contents
Advertisement
Stack Light Pole
Stack Light Mount
Wiring
Cable Tie Mounts
TB1
Figure 11: Stack Light Mounting and Wiring
2.7.5 CHARGER MODULE INSTALLATION
The cabinet can contain up to three charger modules. To install the charger
modules, remove the cover plate from the right side of the cabinet. You may
insert modules in the cabinet in any of the three positions—there are no
requirements for the order or position in which they are installed. Slide each
module into its slot until it is flush with the cabinet and has firmly seated in its
backplane connector on the left side of the cabinet. Install cover plate. See .
Figure 12: Module Insertion/Removal
15
Advertisement
Table of Contents
