Saluki ADS2202A User Manual page 22

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
3.6.5 Data readback function
After the data acquisition is completed, the software can read back the saved radar message files. First, check "Data
Recording and Playback / Data Readback Check"; then, click "Select Data File", select the message file in the pop-up
window; finally, click the "Work" button on the main interface and " The Stop button controls the start or pause of the
readback.
Figure 3.16 Select the file to read back
3.6.6 Silent function
This product can be set to the silent area, that is, the antenna does not open in the setting area, which is used to protect
the personnel in the silent area. The place to modify the silent settings is: "Software Settings / Data Filtering / Silent
(Counterclockwise)". To turn on silence, you need to check "Enable Silence". The silence angle is the area that rotates
counterclockwise from the lower boundary of the silent direction to the upper boundary of the azimuth. For the setting of
the silence angle, refer to Figure 3.18. In Figure 3.18 (a), the lower bound is set to 315° and the upper bound is set to
45°. The corresponding silent region is the shaded area rotated from 315° counterclockwise to 45°; in Figure 3.18 (b), the
lower bound is set to 45°, the upper bound is set to 315°, and the corresponding silent region is the shaded area rotated
from 45° counterclockwise to 315°.
Note: If the azimuth offset angle is set in the software settings, the corresponding silence area should also be added with
the corresponding offset angle.
22