YASKAWA 1000 Series Installation Manual page 17

Ac drive option, motor encoder feedback, heidenhain ern1387 interface

Hide thumbs Also See for 1000 Series:

Connect the ground wire (H) to the ground terminal (I) using one of the remaining

screws (C). Connect the other end of the ground wire (H) to the remaining ground

terminal and installation hole on the option (B) using the last remaining provided

screw (C).

Figure 5

Note: There are two screw holes on the drive for use as ground terminals (I). When connecting three

options, two ground wires will need to share the same drive ground terminal.

YASKAWA ELECTRIC TOBP C730600 52D 1000-Series Option PG-E3 Installation Manual

Figure 5 Connect the Ground Wire

5 Installation Procedure

Table of Contents

L1000a Pg-e3