Display Backlighting - emmeti Sintesi Wall RF Manual

Hour meter of system operation
It displays the operating hours of the system (relay contacts on C-NA or ON command
to the remote actuator).
The device has two counters (5-digit)
independent for heating operation
and for the conditioning operation, but
is displayed only the counter of the
selected operation mode.
To reset the counter, keep the key
The maximum count is 65535h (about 7 years), when this digit is reached, the counter
resumes the count from 0h.

Display backlighting

The display backlighting can be:
• off (blue after pressing a key)
• fixed of a colour that can be chosen among
48 variants
• variable based on the difference between the
measured temperature and the set temperature:
- blue when the measured temperature is lower than the set temperature of at least
0.5°C (and after pressing a key)
- green when the difference between the measured temperature and the set one
is lower than 0.5°C (and in case of operation off)
- red when the measured temperature is higher than the set temperature
of at least 0.5 ° C
off
The backlighting can also be activated/deactivated from the initial screen by keeping
the key pressed for a long time.
pressed for a long time during the display.
colour 1 .....
- 70 -
SINTESI WALL RF Chronothermostat with humidistat User Manual
colour 48
RGB