emmeti Sintesi Wall RF Manual page 51

"Main" page
This screen shows the status of "Sintesi Wall RF":
Night room
HEATING
"Programs List" page
From the main page (Home) in AUTO mode, tap on the program in progress
to access the list of programs relating to the active operating mode. It's possible:
Programs list
HEATING
SEA HOUSE
TEMPERATURE VALUES
Setting the setpoint temperature in manual
operation. Slide the cursor to change the temperature.
Measured temperature (19.5°C)
Operating mode (HEATING)
System status:
Time remaining if the Timer function has been
activated
Operating mode
Touch this area to change the operating mode
(heating/cooling) and mode (automatic/manual/off).
Activation of the timer
Setting the duration of the timing (timer).
It occurs after activating the timer.
and mode (automatic/manual/off).
create a new program for the current season
select, modify, delete or rename an existing program
Note: the padlock symbol to the left of the program
name indicates that that program cannot be edited
or deleted
Display of temperature levels T1, T2, T3
By selecting a temperature level it is possible
to modify the value by sliding the cursor
- 49 -
SINTESI WALL RF Chronothermostat with humidistat User Manual
( ) symbol present = on