Antifreeze Temperature - emmeti Sintesi Wall RF Manual

Antifreeze temperature

(this menu is active only if operating mode = heating)
The antifreeze temperature avoids the risk of freezing
of the system when on the chronothermostat is set
the off operation
.
Allowed values: --- (excluded), 1°C ÷ 50°C .
Factory value: 6 °C.
Note: the "---" setting excludes the antifreeze function; in this case, when the device
is off, no minimum temperature is guaranteed
Adjustment of the measured temperature
In particular installation conditions, it can happen
that the temperature measured by the device deviates
from the average temperature present in the room.
In this case, introduce an adjustment temperature
with the ADJ menu.
Allowed values: -5°C ÷ 5°C .
Factory value: 0 °C.
Note: the temperature value shown on the display during normal operation is inclusive
of any adjustment introduced.
- 66 -
SINTESI WALL RF Chronothermostat with humidistat User Manual