emmeti Sintesi Wall RF Manual page 69

Wi-Fi connection configuration
This sub-menu consists of 3 different screens and described below.
To switch from one screen to another, use the keys
• the device PIN. It is a 4-digit number necessary
to associate the device with your Emmeti account.
This screen also shows:
- the status of the Wi-Fi connection:
on fixed: device connected to the home network
flashing: search for Wi-Fi network in progress
- the association between the device and Emmeti account:
on fixed: associated with a Emmeti account
flashing: not associated with any Emmeti account
Note: during the first 20 seconds or so of this screen viewing
the icon is always flashing.
• the MAC address of the device.
It is a sequence of characters that identifies
uniquely a device inside of a network of devices
(reading must be done from left to right.
In the example: C28d7b)
• the intensity of the signal between the device and the access point (FLD).
For values:
- higher than -60dB: excellent signal quality
- between -60dB and -90dB: good signal quality
- lower than -90dB: poor signal quality
that could compromise communication
between device and access point. In this case,
bring the device closer to the access point.
- 67 -
SINTESI WALL RF Chronothermostat with humidistat User Manual
and .