emmeti Sintesi Wall RF Manual page 44

Wi-Fi RF weekly programming electronic chronothermostat with humidistat function
designed for temperature and humidity control. It has 3 independent radiofrequency
communication channels to control a generator (boiler or heat pump) and / or the
chronothermostatic actuators, a dehumidifi er and a controlled mechanical ventilation
unit (MEV).
The Wi-Fi connection allows you to connect the device to your home router and then
to the Internet, allowing full control even remotely, thanks to the app "Emmeti Sintesi"
available free for iOS and Android.
The activation of the air conditioner (or boiler), dehumidifi er and fan unit takes place
by means of as many remote actuators (to be purchased separately), controlled by
sending radiofrequency signals, therefore without the need for any wiring. It is possible
to control the air conditioner (or boiler) also via cable thanks to the relay on the device.
The display backlighting can be customized by the user by choosing from 48 possible
colours. Alternatively, the backlighting can be set to vary according to the difference
between the measured temperature and the set temperature.
The backlighting can always be turned off if it is annoying, for example because the
device is installed in bedrooms.
App Cloud Emmeti
Code Model
02018148
Sintesi Wall RF
Access Point
Description
Weekly chronothermostat white colour
- 42 -
SINTESI WALL RF Chronothermostat with humidistat User Manual
Sintesi Wall RF