Table of Contents
Advertisement
18 - PERIODICAL CLEANING
WARNING! Turn OFF power and allow approximately 20 minutes for the fixture to cool down.
1
Before removing rear cover, place the head in
a horizontal position and engage both the PAN
and TILT locks for added stability. See the "PAN
AND TILT LOCK" paragrap (pag. 6).
Loosen and remove the marked screws and open-
ing the head covers (1) from both sides.
2
Unclip the safety cable on both sides (2).
40
3
Use a soft cloth dampened with any detergent
liquid for cleaning glass to remove the dirt
from the reflectors, lenses, filters and modules.
PROLIGHTS - Astra Profile600IP
Safety cable
Fig. 14
Advertisement
Table of Contents
