Maintenance Plan - Wacker Neuson APS1030 Operator's Manual

Maintenance

11.2 Maintenance plan

11.2 Maintenance plan
Maintenance work
Clean machine, rechargeable battery and charger.
• Visual check for completeness.
• Visual check for damage.
Check operating elements for ease of movement.
Check screw connections.
Check rubber buffer.
50
CAUTION
Danger of burns due to hot surfaces!
Exciter can become very hot after a short time, which can cause severe
burns if it comes into contact with the skin.
► Always allow the machine to cool down after use.
► If the cooling phase cannot be maintained (e.g. due to an emer-
gency) - use heat-resistant protective gloves.
NOTICE
Damage by penetrating water!
Penetrating water can damage electrical operating elements or machine
components.
Penetrating moisture can lead to total failure.
► Do not clean the machine with high pressure or steam cleaners!
► Use a cloth to remove water that has entered (e.g. due to rain) the
housing and then let the machine dry.
► Only use dry and clean cloths.
Environment
Avoid damage to the environment!
► Clean the machine in a suitable place where the dirty waste water
can be collected in an environmentally friendly manner.
► Collect contaminated water and dispose of it in an environmentally
friendly manner.
daily
●
●
●
Operator's Manual | APS | 5100060593 | 02/2022 | [en]
125 h
●