Installation And Connection - PROMIX SM490 Operating Manual

Promix-SM490 Promix-SM491 Promix-SM492
Modification
Promix-SM490.10
Promix-SM491.10
Promix-SM492.10
Promix-SM490.10-01*
Promix-SM491.10-01*
Promix-SM492.10-01*
Promix-SM490.10-02*
Promix-SM491.10-02*
Promix-SM492.10-02*
Promix-SM490.11-01*
Promix-SM491.11-01*
Promix-SM492.11-01*
Promix-SM490.11-02*
Promix-SM491.11-02*
Promix-SM492.11-02*
*optional
6.

INSTALLATION AND CONNECTION

The lock operation is controlled by means of energizing and de-energizing. For this purpose, a
controller (control board) or a switch (button) is generally used. The controller is mounted in
accordance with its certificate.
Connect power wires of the lock; polarity is of no significance since it does not affect operation
of the lock.
Example of the lock connection to the remote control system Promix-RDS.
Lock
Provide a reliable electriccontact. To prevent short-circuit, insulate places of
connection.
6
Ambient
temperature T ,
amb.
voltage pulse T
°С
-40 to +35
-35 to +50
-40 to +35
-35 to +50
-40 to +35
-35 to +50
-40 to +30
+30 to +50
-40 to +30
+30 to +50
Controller Promix-CR.RX
Remote control
Promix-CR.TX
Duration of supply
, s
ON
0.5÷60
not regulated
0.5÷120
not regulated
0.5÷120
not regulated
0.5÷120
not regulated
0.5÷120
Minimum pause between
voltage pulses, s
6xT
ON
10xT
ON
0.5хT
ON
0.5хT
ON
0.5хT
ON
0.5хT
ON
~220 V