Page 1
No.2666310 1. PURPOSE Electromechanical locks series Promix-SM308 with a hook-shaped locking mechanism (below called the locks) are intended for restriction of access to cells of luggage lockers (post offices), drawers for storage of documentation, lockers and cabins in locker rooms of fitness clubs, swimming pools, schools, factories;...
4. DESIGN AND PRINCIPLE OF OPERATION The lock Promix-SM308 is produced in a normally closed version, i.e., it is in the closed state when de-energized and opens as supply voltage is applied.
Page 3
Promix-SM308 TECHNICAL DATA Promix-SM308.10.1 Modification Promix-SM308.11.1 Version normally closed DC supply voltage U, V 12±2 24±2 Current consumed, А 0.4 (at 12V) 0.27 (at 24V) Supply pulse duration (not more 1-10 than), s Minimum pause between pulses, s Built-in sensors...
Promix-SM308 6. INSTALLATION AND CONNECTION 6.1 LOCK AND LATCH MOUNTING 1. Screw out the screw on the front surface of the lock and remove the cover. 2. Mount the lock on a wall, at a distance of 15mm from the locker wall edge.
Page 5
Promix-SM308 EMERGENCY OPENING OF THE LOCK For emergency opening of the lock, insert a wire (e.g., a paper clip) and, having caught the part “lever” (see the Figure below), move it until the lock operates. Lever Move the lever until...
3-4 (5-4 are open); when the pusher is shifted out of the lock (the door is open), the output contacts 3-4 of the sensor are open (5-4 are closed). See operating voltage range in 5.2. Avoid supply of overvoltage. Example of the lock connection to the remote control system Promix-RDS. ~220 V Lock Controller Promix-CR.RX...
18 months from the day of acceptance by the manufacturer’s QCD. Within the period of warranty, ETC PROMIX LLC undertakes to repair defective products free of charge. Expenses for transporting the product to the place of repair and back will be borne by the Buyer.
Page 8
QCD mark on the body, was manufactured and accepted in compliance with Specifications ПШБА.304268.003 ТУ, obligatory requirements of state standards and current technical documentation, recognized as fit for operation and packed by ETC PROMIX LLC. PROMIX Engineering and Technical Center LLC Russia, 214030, Smolensk, Krasninskoye sh., 35, lit.