Table of Contents
Advertisement
Promix-SM102
6. INSTALLATION AND CONNECTION
6.1 LOCK MOUNTING
The lock design assumes different versions of mounting the adjustment plate on the lock
body. For swing doors and pullout drawers, it is recommended to use positions 1 and 2. For
modifications with a built-in door position sensor, only positions 1 and 2 are possible. For sliding
doors of the rolling door cabinet type, it is advisable to use positions 3 and 4. The plate is
fastened to the body by two screws 6.
1
4
Lock and latch overall and mounting dimensions.
Sensor fastening place
2
For NO
For NС
For NO
For NС
3
4
Advertisement
Table of Contents
