Summary of Contents for PROMIX Promix-SM112 Series
Page 1
No.2382861 1. PURPOSE Electromechanical locks series Promix-SM112 with a ball locking mechanism and a built-in pusher are intended to restrict access to various retail-space furniture: show cases made of laminated chipboards or aluminum sections with one or two glass swing doors;...
Promix-SM112 3 holes The pusher is located in the same casing as the lock, which allows not to mount a handle on the door. If necessary, positions of the lock and the pusher inside the casing can be interchanged; to do this, screw out the screw on the back side of the lock (may be hidden under the sticker) and remove the metal base of the lock.
Promix-SM112 OPERATING CONDITIONS The lock operation environment must be explosion-safe, free of current-conducting dust or gases that cause metal corrosion and destroying insulation of current conductors and electric elements, free of current-carrying dust or water vapor, and preventing ingress of water, steam, fuel and lubricants.
See operating voltage range in 5.1. Avoid supply of overvoltage. Application of voltage of reverse polarity does not provide the lock operability but does cause its failure. Example of the lock connection to the remote control system Promix-RDS. ~220 V Lock Controller Promix-CR.RX...
13. WARRANTY LIABILITIES The manufacturer, ETC PROMIX LLC, warrants conformity of Promix-SM112 locks to requirements of current Technical Specifications provided that transportation, storage, installation and operation rules established in this Manual are followed.
Page 7
Promix-SM112 Within the period of warranty, ETC PROMIX LLC undertakes to repair defective products free of charge. Expenses for transporting the product to the place of repair and back will be borne by the Buyer. Warranty liabilities do not cover any defects and damages caused by: ...