Table of Contents
Advertisement
Quick Links
05.04.2019
engineering and production center
OPERATING MANUAL
Technical description.Installation manual.Certificate.
ПШБА.304268.108 РЭ
PATENT FOR INVENTION
No.2474661
1. PURPOSE
Electromechanical locks series Promix-SM104 with a ball locking mechanism and a built-in
pusher (below called the locks) are intended for restriction of access to trade and office furniture,
luggage locker cells, cabinets, chests, various cases and other equipment, which can be opened
remotely by energizing/de-energizing (depending on the version) the lock with DC supply voltage
by means of switches (buttons) or controllers of access monitoring and control systems, audio
and video intercoms, code panels or other devices. The lock makes it possible to eliminate
mounting a handle on the door since, as the lock is opened, the door opens slightly by itself.
2. LABELING
The label stuck to the lock body contains the following
information:
1.
Lock model.
2.
Patent number.
3.
Nominal supply voltage.
4.
Nominal consumed current.
5.
Date of manufacture and QCD mark
6.
Identification number.
Manufacturer's website.
7.
For the list of lock modifications that can be ordered, see 5.2.
Availability of built-in sensors:
0(Absence) - no sensors. 1 - door and lock sensors
Supply voltage:
0 - 12V. 1 -24V
Version:
0 - normally opened, 1 - normally closed
ELECTROMECHANICAL LOCK
Promix-SM104
1
ELECTROMECHANICAL LOCK
2
Patent No. 2474661
12 V=0.1 A
3.4
Made in Russia
No. 100 001008
6.7
An example of information
layout on the label.
5
1
Advertisement
Table of Contents
Related Manuals for PROMIX Promix-SM104 Series
Summary of Contents for PROMIX Promix-SM104 Series
- Page 1 No.2474661 1. PURPOSE Electromechanical locks series Promix-SM104 with a ball locking mechanism and a built-in pusher (below called the locks) are intended for restriction of access to trade and office furniture, luggage locker cells, cabinets, chests, various cases and other equipment, which can be opened...
-
Page 2: Design And Principle Of Operation
Promix-SM104 3. SET OF DELIVERY 1 – Lock 1 pc. 2 – Latch with adjustment plate 1 pc. 3 – Alignment piece 1 pc. 4 – Self-tapping screw 3.5х15 (cup head) 6 pcs. 5 – Operating manual 1 pc. Check completeness of the lock set when buying! After buying, the manufacturer will not accept claims related to incomplete set. - Page 3 Promix-SM104 TECHNICAL DATA Promix- Promix- Promix- Promix- Modification SM104.10 SM104.10.1 SM104.11.1 SM104.11 Version normally closed Initial latch pushing out force (not less than), kg Maximum “tension” of the door before opening (not more than), kg DC supply voltage U, V 12±2...
-
Page 4: Installation And Connection
Promix-SM104 Lock and latch overall and mounting dimensions. Sensor fastening place 6. INSTALLATION AND CONNECTION 6.1 LOCK MOUNTING Mounting of the lock on a swing door. Mount the lock on an immobile surface. The distance between the inner surface of the closed... - Page 5 Promix-SM104 Insert the latch in the lock after prior centering the latch bar and fitting the alignment piece 3 over the bar (see section 3). Apply voltage to the lock and make sure that the latch is pushed out of the lock.
- Page 6 See operating voltage range in 5.2. Avoid application of a higher voltage or excessive pulse duration. Connect sensor leads: Colored wires (yellow, green, etc.) – door position sensor output. Example of the lock connection to the remote control system Promix-RDS. ~220 V Lock Controller Promix-CR.RX Remote control Promix-CR.TX...
- Page 7 Promix-SM104 Provide a reliable electriccontact. To prevent short-circuit, insulate places of connection. 7. SPECIAL ASPECTS OF INSTALLATION AND OPERATION 1) The possibility of using of the locks for restriction of access to the premises or to equipment and the place of installation (outside or inside) are determined by the installation...
-
Page 8: Troubleshooting
Promix-SM104 TROUBLE-SHOOTING Troubles and problems Remedies Using a tester, check integrity of the lock power circuit. Close the door, case, etc. tightly and press on it at the latch fastening place, and apply voltage to the lock. If the lock does not open, apply an elevated... -
Page 9: Storage And Transportation
18 months from the day of acceptance by the manufacturer’s QCD. Within the period of warranty, ETC PROMIX LLC undertakes to repair defective products free of charge. Expenses for transporting the product to the place of repair and back will be borne by the Buyer. -
Page 10: Acceptance And Packing Certificate
QCD mark on the body, was manufactured and accepted in compliance with Specifications ПШБА.304268.001 ТУ, obligatory requirements of state standards and current technical documentation, recognized as fit for operation and packed by ETC PROMIX LLC. PROMIX Engineering and Technical Center LLC Russia, 214030, Smolensk, Krasninskoye sh., 35, lit.
Need help?
Do you have a question about the Promix-SM104 Series and is the answer not in the manual?
Questions and answers