Maintenance; Storage And Transportation - PROMIX SM490 Operating Manual

7. SPECIAL ASPECTS OF INSTALLATION AND
OPERATION
1) The possibility of using the locks for restriction of access and the place of installation
(outdoors or indoors) are determined by the installation organization on the basis of the
design features and the mounting method, room criticality level, the purpose of the access
restriction regime and other factors (the presence of security providers, video surveillance,
etc.).
2) To prevent deformations of the door due to attempts to open the door with the lock closed, it is
recommended to mount the lock in the area of the door handle.
8.

MAINTENANCE

Maintenance of the lock is performed at least once every two months and includes:

Visual inspection of the lock to check reliability of fastening. If necessary, tighten fasteners
of the lock and the latch.
The lock does not need lubrication!

9. STORAGE AND TRANSPORTATION

Prior to putting into operation, the locks must be stored in the manufacturer's packing, in
rooms with an ambient temperature
at 25º С in compliance with storage conditions as per GOST 15150-69.
Locks transportation conditions must comply with group C as per GOST 23216-78 in terms of
exposure to mechanical factors, and Ж2 as per GOST 15150-69 in terms of exposure to climatic
factors.
10. SAFETY REQUIREMENTS
The design of the locks ensures safety of personnel involved in mounting and maintenance.
Due to low DC supply voltage, the products correspond to class III as per GOST 12.2.007.0-
75 and are electrically safe.
Fire safety of the locks is ensured by use of non-combustible or hardly combustible materials,
and low supply voltage.
11. DISPOSAL
The product is not hazardous for human life and health or for the environment; disposal after
its service life is performed without taking any special measures for environment protection.
12. WARRANTY LIABILITIES
The manufacturer, ETC PROMIX LLC, warrants conformity of Promix-SM490, Promix-
SM491, Promix-SM492 to requirements of current Technical Specifications provided that
transportation, storage, installation and operation rules established in this Manual are followed.
Promix-SM490 Promix-SM491 Promix-SM492
of -30 to +50 °С
and a relative humidity not higher than 98%
7