Figure 3-2, Inverter Setting Flow Chart - Sensata Magnum Energy CSW3012-X Owner's Manual

3.0 Operation
3.3.3 Inverter Settings (enter Setting Mode)
To change an inverter setting, enter Setting mode by pressing the Power and
Select buttons together for about 5 seconds until a beep is heard. Use Figure
3-2 to set the inverter settings. See Table 3-2 for information on the diff erent
settings available for the inverter.
Unit in normal operation
12.8
Press &
enter menu mode to change setting
Press
move to next menu
Press
move to next menu
Press
move to next menu
Press
move to next menu
EXIT
Function Menus

Figure 3-2, Inverter Setting Flow Chart

26
together x5 sec to
Press
PS
x1 sec
x1 sec to
Press
and to exit to the next menu
Press
AL
x1 sec
x1 sec to
Press
and to exit to the next menu
Press
Sd
x1 sec
x1 sec to
Press
and to exit to the next menu
Press
Fd
x1 sec
x1 sec to
Press
and to exit to the next menu
= POWER pushbutton
= SELECT pushbutton
PS0 PS1 PS2
Press x1 sec
to change setting
x5 sec to set selection
AL0
Press x1 sec
to change setting
x5 sec to set selection
SdL
Press x1 sec
to change setting
x5 sec to set selection
Factory
Fd
Default
x5 sec to set selection
Function S et Menus
© 2021 Sensata Technologies
PS4
AL1
SdH